PRODUCT DATA

DESCRIPTION
AND USE 

BIOPOLY 2070 is a scale and sludge inhibitor designed primarily for steam boilers to prevent build-up of deposits of hardness or of iron and other metallic oxides originating from corrosion of Condensate systems.  

BIOPOLY 2070 is based on a synergistic blend of sodium polyacrylate and sodium organo-phosphonate and works by bonding iron in solution by a chelating action, also dispersing precipitated metallic salts.  

GENERAL
SPECIFICATION 

appearance ............... clear liquid 
specific gravity ......... 1.05 
pH as supplied ......... 7.0 
non-infalammable  

TREATMENT
AND DOSAGE
REQUIREMENTS

BIOPOLY  2070  is   normally    maintained  at   concentrations between  100  and   500  ppm  in  the  boiler  water. The correct treatment   level   for  deposit  prevention  depends on operating conditions  such as pH,  operating  pressure and the number of concentrations. The optimum treatment level for any plant will be specified by Water Guard's distributor.  

The  viscosity  of  BIOPOLY  2070  allows  it  to  be handled  by conventional  dosing pumps  without  dilution but it may be diluted if desired.  

BIOPOLY   2070   is not corrosive to  mild steel mixing tanks or dosing  pumps  in  concentrated  or  in  diluted form and may be pumped  direct  from the container  using equipment in steel or plastic if desired.

SAFETY

BIOPOLY   2070  may  be  handled  without  gloves  or goggles. It should not be taken internally.  

PACKING

BIOPOLY 2070 is available in 25 or 200 litre drums.